Low Water Pressure

Low Hot Water Pressure Repair Services

At Summit Drain, we are your top choice for professional low-water pressure repair services. We are an Ottawa-based plumbing company with 10+ years of experience now extending our plumbing solutions to residents in Toronto and across the GTA. If you’re currently dealing with an insufficient volume of water or noticing water is dribbling out of your faucet, shower head, or any other plumbing fixture slowly, then low water pressure is likely the culprit.

Residential Water Pressure Solutions

There’s no worse way to start your morning off than by turning on the shower to discover a slow, sad trickle of water. We here at Summit Drain aim to eliminate your water troubles by delivering residential water pressure solutions. We can increase water pressure in your home by:

Replacing your water main shutoff valve
Upgrading the capacity of main water line
Fixing clogs and leaks in the existing water line
Rerouting the water line for a more ergonomic and efficient operation
Poly B plumbing replacement
Frozen pipe repair

When providing any one of our low water pressure repair solutions, we work with the utmost care and respect whilst in your home. Our professional team of plumbing technicians are also available with 24/7 emergency services for your convenience.

What Causes Low Water Pressure

There are many reasons why your water pressure may be weak or compromised. Let’s examine some of the more common causes why low water pressure occurs.

Using Too Much Water at Once

Running multiple faucets or appliances simultaneously can result in some homes experiencing a noticeable decrease in water pressure.

Water Main Shutoff Valve is Not Completely Open

If the valve inside your home that supplies water isn’t open all the way, less pressurized water is allowed into your water supply lines.

Water Meter Valve is Not Completely Open

The water meter valve may not open all the way if the handle is set at an angle. This can lead to low water pressure in house.

Rusted or Corroded Pipes

Galvanized steel water pipes can rust and corrode as they age. If their condition gets bad enough, the corrosion can lessen the pressure and restrict the water flow. Corrosion buildup can gradually close the pipe and completely block it.

Leak in Water Supply Lines

A leak can often go unnoticed however damaged pipes or leaking valves can decrease water flow and result in low water pressure.

Low Water Pressure Problems

Low water pressure can be a huge problem for any homeowner as this complication can significantly affect the quality of living in your home. Everything from watering plants to doing laundry to showering and washing dishes will become longer and more frustrating to complete when your water pressure is diminished. No matter how the issue arises, a loss of water pressure in the house is a cause for concern because it can affect the following interior and exterior plumbing fixtures:

Bathtub
Dishwasher
Hose hookups
Outdoor faucet
Shower
Sink faucets
Toilet
Washing machine

Low Water Pressure Repair You Can Trust

The speed and volume of your water pressure can be impacted by several factors including using too much water, rusted pipes, a leak in the water supply lines, and more. If you do notice your water pressure is low, it’s best to contact Summit Drain today. Our plumbing professionals can accurately diagnose the problem and offer our residential water pressure solutions to avoid more costly and extensive repairs.

FAQ

A main sewer line blockage can cause water to backup in random places. For instance, you run your washing machine and notice your sink overflowing – this can be a clear sign that you have a clogged drain line.

If you have ruled out a potential sewer drain clog, you can rinse your sewer drain by flushing it with water. When you flush your lines, try adding a bit of drain cleaner to the water. A great place to flush your sewer line is the toilet – a larger amount of water and drain cleaner can enter your system quickly and easily. Unfortunately, if you do this when you have a clog, it can cause backup and potential flooding – if this is the case, clear the clog first.

You should generally know if your sewer line is blocked with slow drainage. The purpose of the sewer line is to take all the water drainage away from your house via sinks, bathtubs or toilets – if you find that there is slower drainage in one drain then you can essentially clear that yourself using a drain snake or a plunger.

There is confusion regarding when you are responsible for sewer line repair. While some may believe that the homeowner is only responsible for repairing the part of the line that’s on their property, this is not the case. Sewer lines consist of multiple sections, the upper lateral, lower lateral and the main line. The city is only responsible for repairing the main sewer line.

If issues with the main sewer line cause damage to your lower lateral, which is most likely where the damage would generally first start – the city would repair this damage when they work on the main sewer line. Unfortunately, if there is backup and flooding on your property from the main sewer line, then the city would not be responsible. It is best to follow up with the city to see if they will repair any damage in these cases.

Unpleasant smells coming from your drains is indicative of sewer line issues and damage. You should always take these types of smells seriously as it could be toxic fumes slowly releasing from the sewer below into your home.

There are a number of ways to clear a slow drain using products found around the home:

Bent Wire – If you do not have a drain snake, you can try using a stiff wire – like one from a clothes hanger, leaving the hook to enter pipes and pull out any clogs. Try to make sure you don’t push debris further into the pipe.

Homemade Flush – Mixing baking soda and vinegar can dissolve any materials that are potentially clogging your drain pipes. This is a good and much safer alternative to store-bought chemical cleaners.

Toilet Plunger – Like plunging a toilet, you can try using this on your drains. Using a plunger on your drains can help get things moving by using suction. This should be enough to fix any mild blockages.

Aged drain pipes are at risk for corrosion which can lead to breaks. Summit Drain has both the technology and expertise to fix this if necessary.

Yes. Drain pipes are durable, but not meant to last forever. If you live in an older home in Ottawa, most likely the pipes are made from copper and can collapse in this day and age.

When it comes to a collapsed drain, call Summit Drain. We use trenchless technology to replace sewer pipes made from original materials without ruining your property.

Rock salt
Rock salt helps by removing moisture from the roots, which in turn kills them. Two lbs should do the trick, pour 1 down the toilet. Flush until gone. And repeat with the next. Then leave for 12 hours and don’t run any water.

Foaming root killers
Another effective way to treat roots in pipes is with foaming root killers. Pour powder into toilet and flush. It will foam upon contact with water. Not only does it help dissolve current roots, but also helps to protect against future ones.

Copper sulfate
Copper sulfate is another good option. Available at most hardware stores, pour roughly half a cup into toilet and flush until gone. Leave the home and take all pets and family members along. This is a toxic substance and banned in some places.

Should I replace old pipes?
There does come a time where it makes sense to replace your pipes. Over time they crack and corrode. It is recommended to begin routine inspections once your home reaches 50 years in age. For plumbing Services in and around the Ottawa area, nobody does it like Summit Drain.